field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The incumbent will oversee field operations for T&amp;D (Transmission and Distribution). The duties will include but not be limited to supervising and inspecting maintenance, repair and installation work performed by contractor and Veolia crews. Maintaining a safe environment for all employees and customers. Primary Duties/Responsibilities: <ul><li>Coordinate and schedule a variety of maintenance, installation, and repair projects.</li><li>Allocate and assign work crews to specific jobs based on job requirements and manpower availability.</li><li>Supervise and inspect maintenance, repair, and installation work to be completed in the assigned service area.</li><li>Follow the MUTCD for safe traffic designs for road closers.</li><li>Perform documented safety inspections of system maintenance crews and inspectors during course of daily field inspections.</li><li>Oversee the billing and field operations of mark-out contractor.</li><li>Update work force management software of field ready work, prior to assigning the activity.</li><li>Respond to complaints or problems received from customers (residential, commercial, and municipal) by conducting physical site inspections.</li><li>Check periodically on work in progress of private contractors to verify the quality of work as well as the statements they submit as to the amount of material and labor used.</li><li>Investigate site for planned projects to determine necessary safety precautions, special tools, and equipment, in addition to other special project requirements.</li><li>Participate in developing and implementing the department's operational scheduling and standard operating procedures.</li><li>Monitor, maintain and develop KPIs.</li><li>Must be able to respond to emergency calls and work extended hours as needed (the incumbent must be a member of the emergency callout rotation team) with a 45-minute response time.</li><li>Commitment to health, safety, and protection of the environment:</li><li>The incumbent supports Veolia's commitment to safety by complying with the programs regarding health, safety, and protection of the environment. The incumbent demonstrates safe work practices, takes part in safety meetings, and advises the superintendent of any non-conforming conditions.</li><li>The incumbent must be in possession of a valid driver's license.</li><li>All supervisory staff are expected to monitor emails and texts for emergency situations which may arise, and communicate with the Manager, Corporate Communications, BPU, DEP, Operations, and other T&amp;D management staff.</li><li>Complies with all organization safety procedures.</li><li>Sets the tone for safety and housekeeping.</li><li>Lead by example.</li><li>Accountable for personnel issues.</li><li>Performance.</li><li>Corrective Action.</li><li>Development.</li><li>Perform other projects / tasks/ duties as assigned.</li></ul> Qualifications Education/Experience/Background: <ul><li>A Bachelor's degree in management, engineering, or science is preferred.</li><li>3-5 years of supervisory experience.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must be able to read complex reports and engineering drawings. Write detailed reports and prepare presentations. Analyze complex operational and engineering challenges and resolve same. Learn new technological advances in distribution technique and equipment.</li><li>Ability to learn how a water distribution network operates.</li><li>Have strong managerial and interpersonal skills.</li><li>Adequate computer skills and the ability to work within an office environment.</li><li>Able to utilize Microsoft Office and Google.</li><li>Able to learn how to utilize a workforce management software.</li><li>Effective supervisory techniques.</li><li>Strong knowledge in methods, practices, procedures, materials, and equipment associated with the construction, maintenance, and repair of water distribution systems.</li><li>Ability to effectively supervise skilled and unskilled employees.</li><li>Ability to accurately read and interpret engineering plans and drawings.</li><li>Ability to work harmoniously and tactfully with other departments and the public.</li><li>Ability to keep accurate records and submit accurate reports.</li><li>Ability to determine work priorities and schedule, organize, assign, and coordinate the work of crews and individuals and communicate this to the Planning department.</li><li>Assist in employee selection, training, supervision, and evaluation.</li><li>Ability to communicate effectively both orally and in writing.</li><li>Ability to handle multiple deadlines and multiple projects.</li><li>Ability to inspect work in progress and upon completion.</li><li>Record keeping and report writing techniques.<ul><li>Understand and perform safety practices and procedures.</li><li>Applicable health and safety regulations as they relate to area assigned.</li></ul></li><li>Must be able to respond to emergency calls and work extended hours as needed.</li><li>Able to understand basic math and hydraulics.</li></ul> Required Certification/Licenses/Training: <ul><li>Must have or be able to obtain a NJDEP Water Distribution Class Licenses.</li><li>NJDEP W-1 Distribution License is preferred.</li><li>Ability to attain CDL.</li></ul> Physical Requirements: <ul><li>Walking on uneven terrain; climbing hills and stairs; moderate lifting up to 25 pounds; sit for long periods at a time.</li><li>Must be able to see clearly, hear through listening devices such as an aqua phone for leaks and hear warning devices and alarms.</li><li>Must be able to speak to give direction and converse with other officials.</li><li>Must be able to smell for dangerous conditions such as sewer gases and chlorine.</li></ul> Additional Information Pay Range $100000 to $105000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Systems Maintenance Supervisor

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The Supervisor, System Maintenance and Planning (After Hours) will lead the after-hours activities of the construction and distribution departments as well as the Central Service Bureau (CSB) . This will include management of operation, maintenance and repair of distribution systems facilities, and related investigative activities on a planned and emergency basis. The Supervisor will approve deployment of personnel as required to execute planned work and maintain continuity of service for customers on an emergency basis. The Supervisor will coordinate any changes in planned activities for the next business day and ensure a seamless transition of oversight is achieved with the business hours team. The Supervisor will ensure all clerical, workforce management and emergency functions are carried out in accordance with acceptable procedures. The Supervisor will provide direction and communication to CSB staff as required to ensure that customer inquiries are handled in a timely, efficient and professional manner. The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday). Primary Duties/Responsibilities: <ul><li> Departmental Coordination and Supervision <ul><li>Coordinate after hours planned and emergency activities of system maintenance departments: Construction, Distribution, and CSB.</li><li>Supervise operations, including the installation, maintenance, repair, and improvement of system facilities (ex. mains, services, hydrants, valves).</li><li>Manage investigative work related to customer inquiries.</li><li>Ensure operational transition of Departmental oversight to and from the business hours team is seamless.</li><li>Coordinate schedule changes for the next business day that may be required as a result of after hour activities and staffing changes.</li><li>Confirm administrative completeness for all activities planned for the next business day and coordinate as required with the business hours team.</li></ul></li><li> Field Visits and Safety <ul><li>Conduct regular construction and distribution work site field visits to ensure teams are adequately resourced to meet customer needs in a safe and efficient manner.</li><li>Initiate action to eliminate safety hazards to employees, customers, and the public.</li><li>Ensure compliance with company policies, industry standards and regulatory requirements such as water quality regulations and safety regulations.</li><li>Prepare field reports documenting progress and identifying opportunities for improvement in prioritization, planning, scheduling, execution, and communication.</li></ul></li><li> Planning and Procedures <ul><li>Ensure execution of after-hours work plans developed with the System Maintenance team for the Construction and Distribution Departments.</li><li>Prioritize, plan, schedule and oversee emergent work as required to maintain continuity of service for customers.</li><li>Staffing and Training Program Support.</li><li>Review staffing plans for activities planned the next business day and coordinate as required with the business hours team.</li><li>Review work and safety training progress for the Departments and advise on projections to ensure the annual requirements and targets are met.</li></ul></li><li> Customer and Stakeholder Relations <ul><li>Working with the Communications and External Affairs teams, coordinate after hours company activities with external agencies and stakeholders as required to resolve mutual concerns.</li><li>Make on-the-spot decisions regarding customer disputes or complaints to maintain good community relations.</li></ul></li></ul> Work Environment: <ul><li>This position will be approximately 50% in the office and 50% in the field in a roadside construction environment.</li><li>The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday).</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Experience in water distribution, construction is preferred.</li><li>Minimum of 2 years supervisory experience in underground utility installation and repair or management and operation of public water supply distribution systems.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to cope with emergency situations on a 24/7 basis in a dynamic and fast paced customer service-oriented business.</li><li>Ability to foster positive labor relations in a union shop environment.</li><li>Ability to read and interpret engineering drawings of distribution networks a plus.</li><li>Understanding of hydraulic principles related to piping networks a plus.</li></ul> Required Certification/Licenses/Training: <ul><li>Ability to pursue a NJ DEP W-1 operator's license within 1 year is preferred.</li></ul> Additional Information Pay Range $115000 to $120000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

System Maintenance and Planning Supervisor (After-Hours)

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties/Responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Ensure that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites.</li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment.</li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education/Experience/Background: <ul><li>High School diploma or General Educational Development (GED) required</li><li>Prior commercial driving experience required</li></ul> Knowledge/Skills/Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification/Licenses/Training: <ul><li>Valid Class A, B, or C Commercial Driving License (CDL) as required</li><li>Hazmat (H) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information Targeted Hourly Pay Range: Minimum of $31 to a maximum of $32 Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Driver Regional

<h4>Introduction</h4> Are you passionate about shaping the future of transportation in Connecticut?&nbsp; If so, join our great team of engineering and construction management professionals and make an impact! Current students who will be graduating with a Bachelor's degree in Engineering or Construction Management by the end of May 2026 are strongly encouraged to apply! The&nbsp;State of Connecticut,&nbsp;Department of Transportation&nbsp;(DOT), is now accepting applications for&nbsp;Transportation Engineer Trainee (Construction Engineering)&nbsp;positions in the&nbsp;Office of Construction, in the&nbsp;Bureau of Engineering and Construction. WHAT WE CAN OFFER YOU <ul><li>Visit our&nbsp;State Employee Benefits Overview&nbsp;page!</li><li>Work at a Forbes-recognized company! Connecticut is proud to be featured on both America's Best Employers by State and Best Employers for New Grads in 2024. With our dynamic job market and commitment to fostering a thriving workforce, Connecticut stands out as a top destination for both seasoned professionals and fresh graduates seeking to launch their careers.</li><li>Professional growth and development opportunities</li><li>A healthy&nbsp;work/life balance&nbsp;to all employees</li><li>Join an award winning agency! CTDOT has been recently awarded the&nbsp;Employer of the Year&nbsp;award by the&nbsp;Connecticut Society of Civil Engineers&nbsp;(CSCE) and named the&nbsp;Women’s Transportation Seminar&nbsp;(WTS) CT Employer of the Year for 2024!</li></ul> POSITION HIGHLIGHTS <ul><li>Monday - Friday.</li><li>Full-time, 40 hours per week.</li><li>First shift.</li><li>Location: Positions available in&nbsp;New Haven, Newington, Norwich, Rocky Hill, and Thomaston.</li><li>This position is eligible to apply for telework after successful completion of the working test period, and thereafter, in accordance with the Telework Policy. The Policy can be found&nbsp;here.</li><li>In the&nbsp;P-4&nbsp;(Engineering, Scientific and Technical) bargaining unit.</li></ul>APPLICATION DETAILS <ul><li>Applicants must be available to travel for training, conferences, meetings, field reviews, etc.</li><li>A valid motor vehicle operator's license is required and must be maintained.</li><li>Please list your Driver's license number, expiration date, and issuing State, Engineer in Training license number (if applicable), and any other job-relevant licenses or certifications you hold, in the Licenses and Professional Certifications section of your application.</li></ul>THE ROLE Transportation Engineer Trainees work in many different capacities agency-wide. Transportation Engineer Trainee positions are available throughout the Bureau of Engineering and Construction. Discover the opportunity to: <ul><li>Problem solve, recommend, and implement effective solutions in a timely manner;</li><li>Contribute to providing safe and efficient transportation improvements for the traveling public;</li><li>Utilize computer aided design software (MicroStation) and other applications such as Microsoft Word and Excel;</li><li>Read and analyze or prepare construction plans and estimates.</li></ul> *SALARY/PROMOTIONAL OPPORTUNITY Promotional Opportunity Salary Transportation Engineer Trainee $72,629/annually After successful completion of a one (1) year training program, you will be promoted to Transportation Engineer 1 (Construction Engineering) $81,047-$99,673/annually After successful completion of two (2) years as a Transportation Engineer 1 (Construction Engineering), you will be promoted to Transportation Engineer 2 (Construction Engineering) $91,244-$117,842/annually ABOUT US The mission of the DOT is to provide a safe and efficient intermodal transportation network that improves the quality of life and promotes economic vitality for the State and the region. To learn more about our mission, vision and values, please click&nbsp;here. Visit&nbsp;our website&nbsp;to learn more about the Connecticut DOT!&nbsp; Watch the video below to learn what Transportation Engineers do at the Connecticut DOT! <h4>Selection Plan</h4> FOR ASSISTANCE IN APPLYING: Check out our&nbsp;Applicant Tips on How to Apply! Need more resources? Visit our&nbsp;Applicant Reference Library&nbsp;for additional support throughout the recruitment process. BEFORE YOU APPLY: <ul><li>Meet Minimum Qualifications:&nbsp;Ensure you meet the Minimum Qualifications listed on the job opening by the job closing date. You must specify your qualifications on your application. The minimum experience and training requirements listed must be met by the close date on the job opening, unless otherwise specified.&nbsp;</li><li>Educational Credits:&nbsp;List your earned credits and degrees from accredited institutions accurately on your application. To receive educational credits towards qualification, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the contact listed below by the closing date listed on the job posting.</li><li>Resume Policy:&nbsp;Per Public Act 21-69, resumes are not accepted during the initial application process. As the recruitment process progresses, candidates may be required to submit additional documentation to support their qualification(s) for this position. This documentation may include: a cover letter, resume, transcripts, diplomas, performance reviews, attendance records, supervisory references, licensure, etc., at the request and discretion of the hiring agency.</li><li>Preferred Shift/Location:&nbsp;Select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.</li><li>Timely Submission:&nbsp;All application materials must be received by the job posting deadline. You will be unable to make revisions once you officially submit your application to the State. Late submissions are rarely accepted, with exceptions only for documented events that incapacitate individuals during the entire duration of the job posting. Request exceptions by emailing <a href="mailto:DAS.SHRM@ct.gov" target="_blank">DAS.SHRM@ct.gov</a>.</li><li>Salary Calculations:&nbsp;For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other.</li><li>Note:&nbsp;The only way to apply to this posting is via the ‘Apply’ or ‘Apply Online’ buttons on the official State of Connecticut Online Employment Center job posting.</li></ul>AFTER YOU APPLY: <ul><li>Referral&nbsp;Questions:&nbsp;This posting may require completion of additional Referral Questions (RQs), which must be completed by the questionnaire’s expiration date. If requested, RQs can be accessed via an email sent to you after the job close date or by visiting your JobAps Personal Status Board (Certification Questionnaires section).</li><li>Prepare For An Interview:&nbsp;Interviews are limited to those whose experience and training are most aligned with the role. To prepare, review this helpful&nbsp;Interview Preparation Guide&nbsp;to make the best impression!</li><li>Stay Connected!&nbsp;Log in daily to your JobAps Personal Status Board to track your status and check email (including spam/junk folders) for updates and tasks.</li><li>The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class.</li><li>Note:&nbsp;This position will be filled in accordance with contractual language, reemployment, SEBAC, transfer, promotion and merit employment rules. Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State employees, available at&nbsp;<a href="http://www.ct.gov/ethics" target="_blank">www.ct.gov/ethics</a>.</li></ul> QUESTIONS? WE’RE HERE TO HELP: Due to high volume, we are unable to confirm receipt or provide status updates directly. For recruitment updates, please check your Personal Status Board and review our Frequently Asked Questions. If you have additional questions about the recruitment process, reach out to Brittney Woodley at&nbsp;<a href="mailto:brittney.woodley@ct.gov" target="_blank">brittney.woodley@ct.gov</a>. Join the State of Connecticut and take your next career step with confidence! <h4>PURPOSE OF JOB CLASS (NATURE OF WORK)</h4> In the Department of Transportation and the Connecticut Airport Authority this class is accountable for receiving training in introductory professional engineering work for the development of technical and professional transportation engineering and transportation construction engineering skills and knowledge in order to qualify for advancement in the field of transportation engineering. <h4>EXAMPLES OF DUTIES</h4> Performs a wide variety of increasingly difficult duties as technical skills are acquired during course of training period. <h4>KNOWLEDGE, SKILL AND ABILITY</h4> <ul><li>Knowledge of basic transportation engineering theories, principles and methods;&nbsp;</li><li>Skill in use of drafting and calculating instruments and other computer applications;&nbsp;</li><li>Considerable ability in performing mathematical computations, making neat and accurate drawings and preparing minor design and structural details.</li></ul> <h4>MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE</h4> Possession of a Bachelor's degree. NOTE:&nbsp;If the target job classification has a Minimum Qualification that requires specific licensure and/or the Bachelor's degree to be in a specific area(s), then these specific licensures and degree areas are required for appointment to the Transportation Engineer Trainee classification.&nbsp;Candidates cannot be appointed until all degree requirements are complete. <h4>MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED</h4> <ul><li>Possession of Professional Engineer (PE) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S. §20-302 may be substituted for the General Experience requirement.</li><li>Possession of Engineer-In-Training (EIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S. §20-302 may be substituted for the General Experience requirement.</li></ul> NOTE: The following additional substitutions are allowed for the Target Class of Transportation Engineer 1 (Construction Engineering): <ul><li>Possession of Land Surveyor (LS) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S. §20-302 may be substituted for the General Experience requirement.</li><li>Possession of Land Surveyor-In-Training (LSIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S. §20-302 may be substituted for the General Experience requirement.</li><li>Possession of at least Level III certification, from the National Institute for Certification in Engineering Technologies (NICET), in one of the following Civil Engineering Technology Programs may be substituted for the General Experience requirement: <ul><li>Transportation Construction Inspection Program - Highway Construction Inspection.</li><li>Construction Materials Testing Program - Asphalt, Concrete or Soils.</li><li>Transportation Program - Highway Materials, Highway Surveys or Highway Construction Inspection.</li></ul></li><li>Possession of a Level III Survey Technician Certification from the National Society of Professional Surveyors may be substituted for the General Experience requirement.</li><li>Possession of an American Welding Society (AWS) Certified Welding Inspector (CWI) certification, at the level of a Welding Inspector (WI) or above, may be substituted for the General Experience requirement.</li></ul> <h4>PREFERRED QUALIFICATIONS</h4> <ul><li>Experience in position-relevant engineering or construction management area.</li><li>Experience utilizing engineering-related computer software and/or construction management software.</li><li>Experience working collaboratively in a team to meet goals and objectives.</li><li>Experience communicating technical information to peers, supervisors, and managers in person, both verbally and in writing using Microsoft Office Suite and SharePoint.</li><li>Experience interpreting construction plans and specifications.</li><li>Experience simultaneously tracking and prioritizing activities or projects while adhering to deadlines and producing deliverables.</li><li>Completion of the Fundamentals of Engineering (FE) exam or Fundamentals of Surveying (FS) exam.</li></ul> <h4>SPECIAL REQUIREMENTS</h4> <ul><li>Incumbents in this class may be required to possess and retain a valid Motor Vehicle Operator’s license. </li><li>Incumbents in this class may be required to travel.</li></ul> <h4>WORKING CONDITIONS</h4> Incumbents in this class may be exposed to some risk of injury or physical harm from highway, construction site, or on-site environments and a moderate degree of discomfort from year-round weather conditions. <h4>Conclusion</h4> AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. <h4>ACKNOWLEDGEMENT</h4> As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

State of Connecticut

Transportation Engineer Trainee (Construction Engineering)

Transportation Engineer Trainee (Engineering)

PART TIME Positions available! Schedule:&nbsp; Every other weekend, 10:30AM-7:00PM$15.50/hour plus shift differential and weekend premium!DUTIES AND RESPONSIBILITIES:<ul><li>To provide safe and clean transportation to and from meals, appointments, outside meetings and residences on the advice of therapy and medical staff.</li><li>To provide delivery of mail and supplies as needed.</li><li>To deliver patient medications to various program areas.</li><li>To purchase small items for patients with the advice of therapy and medical staff.</li><li>This person must be able to learn limited computer tasks like but not limited to checking emails and completing work orders on a computer.</li><li>Must be available during off duty hours and to the supervisor to perform other duties.</li><li>Responsible for keeping the vehicles clean inside and out.</li><li>This job description reflects management’s assignments of essential functions; it does not prescribe or restrict the task that may be assigned.</li></ul>PHYSICAL REQUIRMENTS:The physical and mental demands described here are representative of those that must be met to successfully perform the essential functions of this job.&nbsp; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.<ul><li>Must be able to climb up and down stairs repeatedly.</li><li>Must be able to lift and carry up to 50 lbs. In and out of vehicles and up and down stairs.</li><li>Must be able to drive long distances or for extended periods of time.</li></ul>EDUCATION / EXPERIENCE QUALIFICATIONS:<ul><li>Must be 21 years of age or older.</li><li>Must produce and maintain a valid driver’s license in accordance with Driving Standards Policy</li><li>Must meet minimum requirements on Motor Vehicle Reports in accordance with Driving Standards Policy.</li><li>If recovering, a minimum of one year of continuous sobriety is preferred.</li><li>Current CPR and First Aid certification or obtaining these certifications within 180 days of starting employment.</li><li>High school diploma or equivalent preferred.</li></ul>KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Must be able to get along with clients and all staff.</li><li>Must be able to work flexible hours.</li><li>Must be able to read maps and navigate.</li></ul>

Caron Treatment Centers

Driver

ResponsibilitiesLet your Career take Flight. We are now hiring a Quality Technician to join our Winsted, CT team.&nbsp;Salary<ul> <li>Starting salary $24.00+ Based on Experience/certifications</li> <li>External hires are eligible for a $3,000 sign on bonus.</li> <li>Benefit package includes, Medical, Dental, Visual, vacation, and more.</li> <li>Excellent 401K</li> <li>Growth potential</li></ul>SUMMARYThe Quality Technician is responsible for providing technician support to the following: production and systems quality, administrative systems of certified operator/inspector program, inspection and all internal special processes (except FPI) within the Winsted operation.ESSENTIAL FUNCTIONS<ul> <li>Initiate / source inspection / product release and may review customer purchase orders and specifications as applicable for compliance as part of DSQR/Product Release Agent.</li> <li>Administer the certified operator/inspector program, including training, testing and auditing.</li> <li>Investigate and document certified operator findings and issue appropriate corrective action/written reports.</li> <li>Maintains drawing and specifications for the Winsted plant. Maintains record retention files and area all quality records for the plant.</li> <li>Maintains document revision history, including archive database.</li> <li>Inputs MRB data entry.</li> <li>May provide training on variety of quality issues/programs.</li> <li>Disposition and submit MRB parts.</li> <li>Support administration responsibilities of RMD data entry as needed.</li> <li>Support Data Myte / SPC collection issues as needed.</li> <li>Support administration responsibilities of master shop floor router changes as needed.</li> <li>Support administration responsibilities of drafting department (operation sheet instructions) (off shift)</li> <li>as needed.</li> <li>Follow policies and procedures as outlined in Employee Handbook.</li> <li>Perform all other job duties as assigned.</li></ul>JOB RESPONSIBILITIES<ul> <li>Actively participates, promotes and complies with all EHS programs and policies.</li> <li>Must maintain Final Inspector status.</li> <li>Conduct internal audits.</li> <li>Support administration responsibilities within the Central Quality department as needed.</li> <li>May interface with customers and supplies.</li> <li>Witness welder qualification part submittals and perform weld visual inspections.</li> <li>Report to MFG staff periodically on quality measures.</li> <li>Perform other duties as required to meet business needs.</li> <li>Provide support to shop floor production as needed.</li> <li>Familiarity and compliance with corporate and plant protocols including EHS, SOX, Ethics of Business&nbsp;</li> <li>Conduct, ABS, ASAT, ISO and export control.</li></ul>The products we manufacture are used in important industries.&nbsp; Transporting goods and people; the defense of our country; critical energy infrastructure for hospitals and public safety.&nbsp; Livelihoods and lives depend upon the products we manufacture.&nbsp; What we do as an organization is important and the first, and best, “line of defense” against non-conforming products escaping to our customers is you.&nbsp; A simple message: don’t take it, don’t make it, and don’t pass it.Apply today and let your journey begin as a Quality Technician.QualificationsEDUCATIONHigh school diploma, quality auditor certification a plus.<ul> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Quality Technician

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a 2nd Shift Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self/others</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Assists factory supervision and lead person in the training of Machining Tech I and II</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $19-$23.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

2nd Shift Machining Technician II

ResponsibilitiesAbout Howmet Aerospace:&nbsp;Howmet Aerospace has an opening for a Maintenance Electrical Technician 2nd Shift in our Tucson, AZ location.&nbsp;Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.2nd Shift schedule: Monday - Friday; 2:00PM - 10:30PMSummary:The Maintenance Electrical Technician is responsible for performing electrical work, maintenance and repair of all production and facility equipment in a manufacturing facility.&nbsp;Responsibilities include the production of banded parts meeting print and specification requirements, the care and maintenance of the equipment, interface with subcontractors in the repair of production and facility equipment. The assurance of safe and healthful workplace and a commitment to employee involvement, participative management, and continuous improvement. .<ul> <li>Trade certificate in electrical machine/ facility maintenance and repair, including machining, motor controls.&nbsp; Equivalent experience may be substituted.</li> <li>Familiar with the function and operation of a variety of manufacturing equipment and processes (i.e. heading, rolling, drilling, heat treat, plating, band annealing, assembly and facility support.)</li> <li>Ability to read equipment, component and wiring drawings and schematics.</li> <li>Familiar with Hydraulics and Pneumatics</li> <li>Familiar with VFD’s, sensors, PLC’s, controls, bus duct and bus ducts boxes</li> <li>Ability to install, troubleshoot, and repair 480V, 240V, 120V, 24VDC, &amp; 5VDC</li> <li>Familiar with driving a forklift and scissor lift&nbsp;</li> <li>Familiar with MS Office suite</li> <li>Team Player</li> <li>Takes initiative and follows directions&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li> <li>Knowledge of occupational hazards and safety precautions of the trades involved</li></ul>Qualifications<ul> <li>Minimum of five years’ experience in a manufacturing environment performing machine maintenance and repair</li> <li>Preferred&nbsp; <ul> <li>Ability to install electrical conduit, wiring, switching devices, controls, outlets, fixtures, motors, and other such equipment</li> <li>Fabrication experience&nbsp;</li> <li>Welding, HVAC, Plumbing and PLC experience a plus</li> </ul></li></ul>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position.This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. &nbsp;ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.This position will physically require the incumbent to perform duties standing, walking, overhead reaching, lifting (35 – 40lbs), pushing and pulling totes, and leaning over machines, all equally on a regular basis.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Maintenance Electrical Technician 2nd Shift

ResponsibilitiesMUST be able to work a rotating 3-2-2 shift (Days/Nights) that supports a 24/7 operation.Pay depending on experience. &nbsp;Candidates will be subject to&nbsp;a 90-day probationary&nbsp;and training period.Howmet Aerospace, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation.As a part of our Howmet Structure Systems Business Unit, our Savannah Operations is a heavy industrial Forging manufacturing plant located in Midway, Georgia, employs approximately 200 people and is poised for growth!Do you have diverse experience in maintenance, minor electrical work, and trouble shooting mechanical equipment? &nbsp;Do you enjoy working in a fast-paced manufacturing environment? &nbsp;We have an immediate opening for a Maintenance Technician (Millwright / Mechanic / Electrician)! &nbsp;Company Benefits:We offer eligible employees a comprehensive benefits package designed to assist employees and their families with financial security, health and well-being. In addition to competitive pay, we offer a variety of benefit programs:<ul> <li>Weekly pay; shift differential for night shift</li> <li>Medical, Life, Dental, Vision, and other Company benefits</li> <li>401(k) with Company retirement contribution and Company match&nbsp;</li> <li>Performance Pay based on business performance</li> <li>Vacation eligibility&nbsp;</li> <li>Paid holidays</li></ul>Howmet Aerospace was voted one of the World's Best Employers by Forbes for 2022 and 2023!&nbsp; Apply today and join a great team of market leaders with a passion for helping our customers win!The Maintenance Technician inspects, repairs, maintains, and assembles all equipment within the Production Facility. This includes Hydraulic Forge Presses, Natural Gas and Electric powered Furnaces, Product Conditioning Equipment, Overhead Cranes, Mobile Equipment, CNC Machines (Horizontal and Vertical Lathes), and Water Jets.Essential Functions:This is a representative summary of the major duties and responsibilities and is not all inclusive. Incumbent(s) may and may be required to perform additional, position-specific tasks.Maintain Equipment through the execution of the Preventative Maintenance (PM) program.Troubleshoot and repair mechanical issues causing equipment failures.Prepare and maintain records detailing inspections, observations, and repairs on all equipment.Consult equipment manuals, schematics, hydraulic diagrams, and engineering personnel in order to efficiently troubleshoot and solve equipment problems.Demonstrate a general understanding of Mechanical, Hydraulic, and Electrical system principles.Ability to operate heavy machinery such as Forklifts, Extended Boom Lifts, Scissors Lifts, and Production Equipment.Troubleshoot/Repair facility and equipment pneumatic systems.Rebuild/Replace Hydraulic pumps, cylinders, valves, accumulators, and hoses.Remove, Repair, and Install up to 40” hydraulic pipe.Fabricate simple equipment designs to support Operations and repair equipment.Electrical troubleshooting up to 480V.Replace electrical motors, motor contactors, fuses, breakers.Troubleshoot large hydraulic and mechanical systems to find and repair hydraulic leaks.Ability to work at heights to service overhead cranes.Comfortable working in dirty environments to support the hydraulic forge presses.Ability to complete general Production Facility duties such as clearing debris, installing product racking, and other 5S initiatives.Ability to work a rotating shift (Days/Nights) that supports a 24/7 operation.Maintains a safe and organized workstation and follows all company policy, safety and procedures.Performs all other duties as assigned.Knowledge/Skills/Abilities:Hydraulic Systems – Knowledge of how hydraulic pumps, cylinders, valves, and accessory equipment works to generate desired equipment movement.Mechanical Systems – Knowledge of general mechanical systems and how to troubleshoot those systems.Electrical Systems – Knowledge of general electrical systems and how to troubleshoot those systems.Equipment Preventative Maintenance — Monitoring gauges, dials, or other indicators to make sure a machine is working properly.Troubleshooting — Demonstrate an ability to determine why equipment failed and make the necessary repairs to return equipment to Operations.Communication — Ability to effectively and comfortably communicate technical information to others inside and outside of the Maintenance Department.Production and Processing — General knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.Quality Control Analysis — Conducting tests and inspections of equipment, products, services, or processes to evaluate quality or performance.Reading Comprehension — Understanding written sentences and paragraphs in work related documents.Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Basic functions of Microsoft Office Suite.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Physical Demands:Continuously required to wear common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats.Continuously required to stand; walk; use hands to handle or feel; reach with hands and arms; and talk or hear.Occasionally required to stoop, kneel, crouch, or crawl.Frequently required lift and/or move up to 50 pounds.Occasionally required to sit.Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Work Location/Environmental Requirements:Nickel and titanium manufacturing facility. Exposure to: moving mechanical parts; wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; extreme cold, extreme heat, vibration; loud noise levelQualificationsBasic Qualifications:<ul> <li>High School Diploma/GED from an accredited institution</li> <li>Minimum 3 year of maintenance experience and working in any combination of these specialty areas: Hydraulic Systems, CNC Machines, Water Jets, Mechanical Systems, Electrical Systems, Welding or Facilities/General Maintenance.</li> <li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Preferred Qualifications:<ul> <li>Associates or bachelor’s degree from an accredited institution in maintenance related function.</li> <li>3+ years of experience working in at least one of these specialty areas: Furnaces, Hydraulic Systems, CNC Machines, Water Jets, Mechanical Systems, Electrical Systems, Welding or Facilities/General Maintenance.</li></ul>Howmet Aerospace is an equal opportunity employer that supports diversity and inclusion. Howmet provides equal employment opportunities for all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex (including pregnancy), national origin, disability, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristics protected by law.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

1, 101 Technician Jobs