field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties/Responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Ensure that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites.</li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment.</li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education/Experience/Background: <ul><li>High School diploma or General Educational Development (GED) required</li><li>Prior commercial driving experience required</li></ul> Knowledge/Skills/Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification/Licenses/Training: <ul><li>Valid Class A, B, or C Commercial Driving License (CDL) as required</li><li>Hazmat (H) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information Targeted Hourly Pay Range: Minimum of $31 to a maximum of $32 Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Driver Regional

ResponsibilitiesAbout Howmet AerospaceHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>.Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.Howmet Fastening Systems (HFS) is seeking a 2nd Shift Machine Tech II&nbsp;in our&nbsp;Torrance, CA&nbsp;location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.Primary PurposeSets up, operates, and trouble shoots various secondary machines in all manufacturing departments.Major Activities<ul> <li>Proficiently sets up, operates, and trouble shoots machinery for self/others</li> <li>Sets up machines, according to work order set standard procedures and specialized company products and/or processes</li> <li>Learns the set up and operation of any new machines added to the departments to which assigned</li> <li>Assists factory supervision and lead person in the training of Machining Tech I and II</li> <li>Checks parts with standard gauges or precision measuring instruments and submits parts for inspection as required</li> <li>Operates machines to ensure proper functioning and releases to and instructs operator in procedures for producing parts in conformance with specifications</li> <li>Perform SPC Charting as required</li> <li>Keeps work area clean, safe, and in an orderly fashion on a daily basis</li> <li>Performs other tasks as required</li></ul>Essential Knowledge &amp; Skills<ul> <li>Certified in Lock Out/Tag Out&nbsp;</li> <li>Ability to read and interpret blueprints</li> <li>Must have good communication skills and know basic shop math&nbsp;</li> <li>Must be able to read, write and understand English</li> <li>Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies)</li></ul>QualificationsBasic Requirements:<ul> <li>High school diploma or general education degree (GED)&nbsp;preferred.</li> <li>Minimum 1 year experience in relevant machining experience.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul>Benefits/Salary:The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $19-$23.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutHowmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Howmet Aerospace

2nd Shift Machining Technician II

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Certified Dialysis Patient Care Technician | Closing Shift 10am - 10pm

Certified Dialysis Patient Care Technician | TTS| Closing Shift 10am - 10pm

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!PROPULSION ASSEMBLY TECHNICIAN I/II - 2ND SHIFTBased out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Assembly Technician is responsible for building sub-assemblies for the Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.&nbsp;(Please note: this position can be hired at the Propulsion Assembly Technician I or Propulsion Assembly Technician II level)WHAT YOU'LL GET TO DO:<ul><li>Work on a high caliber cross functional team</li><li>Test rocket hardware</li><li>Build turbo pumps and rocket engines.</li><li>Watch the hardware you build make fire and go to space.</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN I:<ul><li>2+ years of mechanical assembly experience in aviation, aerospace, or similar industry</li><li>Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)</li><li>Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)</li><li>High school diploma or GED.</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN II:<ul><li>5+ years of mechanical assembly experience in aviation, aerospace, or similar industry</li><li>Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)</li><li>Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)</li><li>High school diploma or GED.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>8+ years of mechanical assembly and/or mechanical fitting experience</li><li>Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak). .</li><li>A&amp;P, trade, or industry certified.</li><li>Experience with in-space mechanical assemblies preferred.</li><li>Knowledgeable in manufacturing processes and continued product development.</li></ul>ADDITIONAL REQUIREMENTS&nbsp;<ul><li>Willing to work&nbsp;2nd shift (Monday- Thursday 2:30pm - 1:00am)&nbsp;</li><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min </li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$35 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Propulsion Assembly Technician I/II - 2nd Shift

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!MANUFACTURINGRocket Lab’s Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers.SENIOR AVIONICS MANUFACTURING TECHNICIAN&nbsp;Based onsite at Rocket Lab's global headquarters in Long Beach, California the Senior Avionics Manufacturing Technician is responsible for building and testing components and electrical assemblies of the Rutherford rocket engine - an electric propellant pump system. Avionics Manufacturing Technicians are responsible for a broad range of responsibilities including soldering, wire harnessing, PCB assembly, functional testing, operating thermal chambers, creative ideas, and offer continuous improvement recommendations.You will support senior leadership and the Avionics Production organization with deliverables required for internal leadership, board of directors, and investors.WHAT YOU’LL GET TO DO:<ul><li>Follow work instructions and offer recommendations for continuous improvement.</li><li>Speak openly and elevate concerns / recommendations to Leading Hand.</li><li>Think creatively, and question status quo.</li><li>Actively contribute to local 5S work center.</li><li>Identify and highlight abnormalities.</li><li>Complete assigned special projects and scheduled jobs.</li></ul>YOU’LL BRING THESE QUALIFICATIONS:&nbsp;<ul><li>8+ years of experience with electrical assemblies and components</li><li>High School diploma or GED</li><li>PCB assembly experience</li><li>Soldering and/or harnessing of small electrical assemblies</li><li>Use of common tools such as screwdrivers, pliers, spanners, soldering irons</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Inspect PCB and wiring assemblies meet customer workmanship standards.</li><li>Use of specialist tools and equipment; wire strippers, torque drivers, milliohmmeter, multimeter, DC power supply, etc.</li><li>Experience testing components, sub-assemblies, and operating test equipment</li><li>Operate thermal chambers, functional test equipment, and perform software driven tests.</li><li>Knowledge of standard industry Electrostatic Discharge (ESD) policy</li><li>Manufacture electronic components to NASA workmanship standards using either IPC-J-STD-001 or IPC-610</li><li>Manufacture electrical harnesses to IPC-620 standards.</li><li>Experience assembling per manufacturing instructions and drawings.</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Must be able to walk and stand for long periods of time&nbsp;</li><li>Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents&nbsp;</li><li>Must be able to lift up to 25lbs. unassisted.&nbsp;</li><li>Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment&nbsp;</li><li>Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces&nbsp;</li><li>Must be willing to work extended hours and/or weekends as needed&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$32—$42 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Avionics Manufacturing Technician

Join the Clean Energy RevolutionBecome a&nbsp;Heavy Transportation Driver&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll serve as a Heavy Transportation Driver within the Supply Logistics organization.&nbsp;As a&nbsp;Heavy Transportation Driver, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?A day in the life - Get ready to think big, work smart and shine brightly!<ul><li>Drives any size or type of heavy truck and tows any size or type of trailer with an unlimited combination of axles and/or maximum weight and/or height, width or length allowed by state or local regulations, to transport material, tools, equipment, and supplies.&nbsp; Loads and unloads all types of freight and construction equipment from truck and/or trailer.</li><li>Operates or directs others in operation of truck and trailer auxiliaries, and all types of material handling equipment to load and unload freight.</li><li>Performs duties of Construction Equipment Operator IV, as qualified, or helper when not hauling freight.</li><li>Loads truck and trailer to assure proper distribution of load. Secures loads to prevent shifting and covers load as required to prevent damage.</li><li>Performs vehicle inspections and makes minor or emergency repairs and adjustments.</li><li>Attaches coupling, safety chains, lights, brake connections and warning flags.</li><li>Signs paper for receipt and delivery of freight.</li><li>Prepares vehicle operator reports.</li></ul>Qualifications - ExternalThe essentials<ul><li>Four or more years of experience as a Heavy Transportation Driver.</li><li>Valid California Class A Driver's License with a clean abstract and the ability to drive interstate.</li></ul>The preferred<ul><li>Five years of flatbed and/or trailer experience.</li><li>Class A license that inclues these endorsements: Hazmats, Tankers, Doubles and Triples.&nbsp;</li><li>Knowledge of: Operation and maintenance of heavy truck and trailer equipment; Company policies and practices and Accident Prevention Rules for vehicle operation; traffic laws, permits and routes for trucking activities; trucker rigging methods and hand signals for material excavation and earth moving construction equipment for loading or unloading or work as qualified as Construction Equipment Operator IV; First Aid Procedures; and Safe Work Practices.</li><li>Ability to: Skillfully operate and maneuver truck and trailer equipment under a variety of traffic and terrain conditions; comply with traffic laws; follow authorized truck routes; make minor repairs and adjustments to trucking equipment; understand and follow oral and written instructions; perform heavy physical work; write legibly; give and interpret signals for operating material handling equipment; operate light construction equipment for on or off loading as required; and maintain a Class A Driver's License.</li></ul>You should know<ul><li>Visit our&nbsp;Candidate Resource page&nbsp;to get meaningful information related to benefits, perks, resources, testing information, and hiring process, and more!</li><li>This position will involve overnight stays depending on where the work is assigned.</li><li>Work Hours: 5am-1:30pm M-F.</li><li>This position may require additional testing as part of the selection process.</li><li>Testing&nbsp;- This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our Information Guides, for the following test(s): Edison EEI BCAB test 5206. Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.Southern California Edison is a proud Equal Opportunity Employer, including disability and protected veteran status. We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

58 Technician Jobs in Los Angeles, CA, USA